steel plate hot rolled
"
Flange e raccordi in acciaio inossidabile C-22 Elettrodi rivestiti in filo con barra in lamiera di lamiera
Product Name : ALLOY C-22 (UNS NO6022) - HASTELLOY® and HAYNES® are registered trademarks of Haynes International, Inc Characteristics − Ni-22Cr-13Mo-3W-3Fe alloy with better overall corrosion resistance and versatility than any Ni-Cr-Mo alloy today. Outstanding resistance to localized corrosion, ...
Acciaio laminato a caldo tubo di rivestimento di carbonio AISI/SAE 1018 Finito a freddo UNS G10180 Durable
Product Name : Carbon AISI/SAE 1018 COLD FINISHED (UNS G10180) - Cold Drawn '20' Carbon Steel, available in all bar sections Characteristics − Most cold finished bars are produced by cold drawing oversize hot rolled bars through a die. The cold reduction of the bar results in significantly improved ...
Involucro e tubi forgiati per tubazioni in acciaio al carbonio Carbonio A105 A350 LF2 DOPPIO A105 A350-LF2
Product Name : Carbon Cold Finished 1045 Chrome Plated Shafting Characteristics − The basic product is cold drawn, precision ground and polished AISI 1045 shafting with a seam free surface finish of RMS 25 max. The bars are then hard chrome plated by electrolytically deposited layer of chromium ...
Tubi senza cuciture in acciaio di lega durevole di diametro 3-800 mm, barra rotonda cromata
Product Name : 440c stainless steel round bar Round Bar : Diameter 3-800mm AISI 4130 is a low alloy chromium molybdenum (CrMo) steel. It has a lower carbon level than 4140 giving improved weldability and machinability. It is widely used in oil field applications Scope The specification defines the ...
Leghe E52100 Fittings in acciaio inossidabile Leghe di cromo ad alto tenore di carbonio Condizione ricotta in magazzino
Product Name : Alloy E52100 Characteristics − This high carbon, chromium alloy is stocked in the annealed condition. − This grade is manufactured by the electric furnace process. Typically the quenched hardness is 62 to 66 HRC depending mainly upon section thickness Typical Applications − Grade ...
Fittings di tubi in acciaio inossidabile in lega a soluzione solida Nikkel saldatissimo - lega di rame 400
Product Name : Nickel Alloys 400 Characteristics − Nickel-copper alloy 400 is a solid-solution alloy that can be hardened only by cold working. It has high strength and toughness over a wide temperature range and excellent resistance to many corrosive environments. Typical Applications − Alloy 400 ...
Fittings in acciaio inossidabile durevole Lega di rame e nichel 500 Eccellente resistenza alla corrosione
Product Name : ALLOY 500 (UNS N05500) Characteristics − Nickel-copper alloy 500 combines the excellent corrosion resistance characteristic of alloy 400 with the added advantages of greater strength and hardness. The increased properties are obtained by adding aluminum and titanium to the nickel...
Raccordi per tubi dell'acciaio inossidabile della lega di nichel C-22 Ni-22Cr-13Mo-3W-3Fe resistente alla corrosione
Product Name : ALLOY 500 (UNS N05500) Characteristics − Nickel-copper alloy 500 combines the excellent corrosion resistance characteristic of alloy 400 with the added advantages of greater strength and hardness. The increased properties are obtained by adding aluminum and titanium to the nickel...
Prove idrauliche Lsaw Tubi in acciaio AISI H13 / H13 ESR Gradi per lavori a caldo +RURY +ZE +SZWEM +SPIRALNYM
Specialty – AISI H13 and H13 ESR - Hot Work Grades Product Name : +RURY +ZE +SZWEM +SPIRALNYM Characteristics − High hot tensile strength, hot wear resistance and toughness − Good thermal conductivity and resistance to hot cracking − Excellent machinability due to additional calcium treatment ...
